Opticon 2002

OPN2002 scanner in general is a very difficult scanner to use. We recommend you get a Scanfob 2006 or Socket 7Ci scanner instead.

Please follow the instructions below to connect an OPN2002 scanner to your phone:

Here is a video show you how we connect OPN2002 scanner to an iPhone.

1. Download the manual here.
2. Print out the 2nd page with title: OPN2002 Quickstart Guide for HID
3. Follow the steps in the instructions and for step 2, you can scan the barcode below instead
   
4. When using OPN2002 scanner to scan the pin number during pairing, make sure you scan the End barcode as last.

!Some users of the Opticon 2002 may see issues with scanning after connecting their scanner in HID mode. You may need to update the firmware of your Opticon 2002 to the most recent version for the device to work properly with FBAScan. Please consult wiki.opticon.com/index.php/OPN_2002#How_do_I_upgrade_the_firmware.3F or contact your seller or manufacturer for assistance.