After you connect the scanner to the phone in HID mode, the scanner will act just like a keyboard to the phone. Our app is not aware of your scanner, it just takes input from whichever keyboard happens to be connected. When your scanner scans a barcode, it will send the barcode to the currently active program on the phone just as you are typing a number with the phone’s keyboard. You can also scan a barcode into the Email or Notepad app on your phone.

Please follow the steps below to troubleshoot your scanner.

  1. To verify your scanner is paired to your phone successfully, open the Email app on your phone and see if you can scan the barcode into a blank email. If you can scan the barcodes to your Email app, then your scanner is paired successfully and you should be able to scan the barcode to the Scoutly app as well. Here is a video to show you how to do this.
  1. If you can scan the barcode into your Email app, but not all the time, make sure you are not using 3rd party keyboard app such as Swiftkey. You need to disable any 3rd party keyboard apps and only use the default keyboard app. Please see this topic for more information.
  1. After you scan the barcode into your Email app, verify the barcode matches the barcode of your item. For books, it must be EAN-13 barcode which starts with “978”. For other items, it must be a UPC-A 12 digit number. You cannot scan UPC barcodes on a book. Please see this topic to learn how to scan a book correctly.
  1. If the barcode does not scan correctly into your Email app, then the barcode scanner is faulty. You can try to factory reset the scanner to see if it fixes the problem. Please check this topic.
  1. After you’ve tried all the steps above and your scanner still cannot scan the correct barcode into your Email app, then the scanner is defective. You need to check the warranty on this scanner with the manufacturer or try using another scanner.

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Please do not use this for support questions.
If you have any questions this tutorial doesn't answer, please contact us here!

Post Comment